Transmitter-side thinking for video fiber links — the multi-format converter families, the LED screen fiber converter, and how transmitter/receiver pairing is specified.
'Fiber video transmitter' is how buyers search for the sending half of a video fiber link, and it deserves a precise answer: in this catalogue, transmitters are not a separate product universe — every converter family is built as transmitter/receiver pairs, and the transmitter is the unit that accepts the electrical interface (BNC, HDMI, DVI) and launches it onto fiber. This page gathers the multi-format end of that world: the Other Video Converters family, whose six models cover conversion duties that do not sit inside a single interface family.
The family's most specialised member shows why the category exists: the LED Screen Fiber Converter (documented in the wider catalogue with 1×10G SFP+ fiber port and 8× Gigabit Ethernet ports) exists to feed LED display sending cards over distance — a transmitter role that is neither 'video converter' nor 'switch' but a bridge between the LED control system and the screen. Multi-format plants — a venue with SDI cameras, HDMI playback and an LED wall — are specified from this page outward: one transmitter discipline, several interface families.
| Model (official product name) | Series | Documentation |
|---|---|---|
| 3G SDI to AV Scaler Converter | LNK-SA001 | Specification captured from the official product page |
| 3G-SDI to HDMI Converter | — | Specification captured from the official product page |
| HD-SDI Extemder Repeater over Coax Cable | — | Full specification confirmed per model at quotation |
| HDMI Extenders over Single RG6 Coaxial Cable up to 100m/328ft Support IR Remote Control | — | Full specification confirmed per model at quotation |
| HDMI to 3G-SDI Converter | — | Full specification confirmed per model at quotation |
| USB VGA KVM over CAT5/6 UTP Extender | — | Full specification confirmed per model at quotation |
The Other Video Converters family (6 models) as listed in the manufacturer's catalogue; transmitter/receiver pairs for the SDI and HDMI families are listed on their own pages.
Never order transmitters alone against an assumed receiver: the pair is the product. Inquiries from this page should state the destination device as well as the source, and the quotation will name both ends and their optical modules.
If the destination is an LED screen, say so at the top of the inquiry: the LED screen fiber converter path (fiber in at 10G, Ethernet out to the sending card) replaces the generic converter pair and changes the fiber plan.
Multi-format sites always contain one source that does not fit — a legacy scaler, a proprietary output, a camera with a combined connector. List them; the Other Video Converters family exists because such sources are normal, and the honest answer is sometimes a two-step chain, quoted as such.
Only as spares for an existing documented pairing. A transmitter's counterpart is part of its specification; tell us the installed receiver model and we will match it, or quote the pair.
It converts between optical and electrical Ethernet at the screen end of an LED system: documented with a 10G SFP+ fiber port and eight Gigabit Ethernet ports feeding the display's sending infrastructure. Treat it as part of the LED control chain, specified with the screen project.
The multi-format units in this family cover specific documented combinations. General rule: one interface family per link, with combination models where the catalogue documents them — the inquiry is where combinations get validated.
Send the model name, the distance, the fiber type and the quantity. We will confirm the matching transmitter/receiver pairing, the optical module and the full specification of the exact model in writing before you pay.